Setup ALTAIR front display working mode and display brightness.
- KEEP ON: Display will keep on till manually switch off by remote control. Display will light again by any button on the remote control or the rotary switch.
- AUTO OFF: The display switches off automatically after 5 seconds without any operation. And it will light again by any button on the remote control or the rotary switch.
- DIM: Set display brightness to low.
- NORMAL: Set display brightness to middle.
- BRIGHT: Set display brightness to high.
HINT: You can press the 'DISPLAY' key on remote control to turn off the display.
You may also adjust this setting inside Lightning DS under Lightning Device setting.
Note: The DISPLAY menu setting will not effect the USB output signal.