How do I play MQA files with my AURALiC streaming device?

 

1. Make sure your streaming device is running the latest firmware version. (The minimum requirement for MQA support is v5.0.)

To check your firmware version:

  • In the Lightning DS app, go to: Settings/Lightning Device/[your device]/Additional Operations, select Hardware Setup and scroll down to “Firmware Information". 
  • In a browser, enter the IP address of your device (make sure it’s turned on and connected to your network), select Hardware Setup and scroll down to “Firmware Information”.

If necessary, update the firmware on your device by following these instructions.

 

2. Configure MQA settings:

  • In the Lightning DS app, go to: Settings/Lightning Device/[your device]/Additional Operations and select Streamer Setup and scroll down to “MQA Playback Setup”.
  • In a browser, enter the IP address of your device (make sure it’s turned on and connected to your network), select Streamer Setup and scroll down to “MQA Playback Setup”.

You will find explanations for the various MQA settings on the right side of the page:

 MQA.jpg

Have more questions? Submit a request

Comments

Powered by Zendesk