About This Release:
- 4th March 2019
- Devices with firmware from Version 1.8.2 and earlier will need to update the boot code after reboot. There will be a message displayed on device warning people not to power off the unit during this stage. The updating of boot code will take about 70 - 80 seconds. The unit will reboot after boot code has been updated.
Please make sure you do not reboot or turn off the unit during the update of boot code, or else the unit will no longer be able to boot up (will have to return to factory for flashing the boot code).
- Add Parametric Equalizer and Speaker placement compensation in processor engine. Please refer refer to the manual inside web control interface for operation instruction.
- Support OpenHome standard online streaming features, you can use TIDAL and Qobuz with Lumin and Linn Kazoo control software.
- Spotify Connect virtual input channel has merged into Lightning Player, you can use processor engine to apply effect to those inputs now.
- Spotify Connect virtual input channel now uses Lightning Playback engine's volume control.
- Add transport control for Spotify Connect virtual input channel, you can use remote control or on device control (G series) to control play/pause, next/previous track.
- You can adjust buffer time for each input channel individually on VEGA G1/G2.
- Update OpenHome network protocol.
- PCM Auto Detect function will run test every time user switch output channel to make sure the result match current channel.
- G series device will try to reconnect to network rather than jump to WiFi hotspot mode if network connect is disconnected.
- Use Google's 126.96.36.199 DNS server as primary server unless user's has manual setup another one.
- Spotify Connect not working
- There is no "-" symbol in G series software keyboard of front display.
- Device will not erase volume control setting even after a factory reset operation.
- Unable to play AIF file over 2GB.
- Other playback relating bug.